Product Description
Important Information:
Always keep both your vehicle end socket and your trailer end plug clean and free of dirt and debris. Use silicon, WD-40 or terminal grease before connecting together.
Please disconnect trailer end connector plug from your vehicle end connector plug carefully; Slowly - pull trailer plug end straight out from vehicle end plug and not at an angle. If not done with care - damage to the pole pin(s) on the trailer end plug can become unstable and require replacement. If done correctly plug ends should last a long time, but will over time and use require maintenance / repair-replacement.
Legal Disclaimer
Engineered for 12 Volt DC Powered Vehicles that are towing or hauling trailers or other vehicles/boats which require DOT Approved STT Tow Lights for Stop (brake), Turn (either left or right signal) and Tail lights (running lights) while driving on US highways, roads or public access ways. We use the STT wire standard configuration. STT Tow Lights are assembled by hand in the USA with most of the components made by USA companies. All Tow Lights are tested prior to packaging / shipment. We use either Curt, Hopkins, Reese or Pollak Plugs. All Quality plugs have been wired using the standard 4 way flat STT tow lights for trailer configuration. (The configuration of STT wire colors to light function is included w/ each order.) We will work with you as much as we can to configure the tow lights for your setup. NOTE: All Plugs are made outside the USA.
- Commercial Grade, Magnetic S.T.T. TOW LIGHTS, 37 Total Feet of 16/4 Cable, 4 WAY FLAT LED Circuit Tester Connector w/ dust cover, one trailer end plug spare and one vehicle end spare included to make repairs on the road
- 3" Round ceramic magnet bases dipped in white silicon, heat dried & finished w/ black rubber spray coating
- Custom Made for the Professional Tow Industry, Recreational Luxury Mobile Home, RV, 5th Wheel or Cargo Trailer End-User
- 4 Way Flat LED Trailer Connector / Plug connected to 30' length 16/4 black jacket pvc cable (Shrink Tubing, Assmbly in USA)
- 37' Total Cable, 16 Gauge / 4 Conductor Wire, Black PVC Jacket (Made in USA)
- 7 Feet Cable length between LED Lamps
- LED's: Maxxima LED Lamps, S.T.T., 6 LEDs (diodes) per Lamp
- 2, Three inch Round, 60 Pound Pull Strength Ceramic & Chrome Magnets, Each Mag Base has been Dipped in Pure White Silicon, Dried & Sprayed w/ Black Rubber (Assembled in-house, USA)
- 2, 3M Adhesive Black Felt Round Swatches- added protection if used on magnet bases
- Heavy-Duty, Commercial Grade Truck-Lite Black Rubber Round Lamp Housings for Protecting LED's. Tow Lights have been rated for Endurance, Durability & Harsh Climate
- 1 Spare "Hopkins" 4 Way Flat Quick-Fix Vehicle end LED Plug included to complete the set should your vehicle connection require replacement (very easy to install / use)
- 1 Spare "Hopkins" 4 Way Flat Quick-Fix Trailer end LED Plug included should your vehicle connection require replacement (very easy to install / use) Also, this is the hardest working part repeatedly being pushed and pulled on and when maintenance is needed, you'll have a spare that can be changed out with a pliers and a screw driver.
- Terminal Grease Pack
- S.T.T. = Stop, Turn & Tail Lights, Left Turn Signal, Right Turn Signal, Brake Light Signaling, DOT Approved
- This product has many components that have been Designed, Manufactured and Assembled in the USA including testing of product prior to shipping of order.
Important Information:
Always keep both your vehicle end socket and your trailer end plug clean and free of dirt and debris. Use silicon, WD-40 or terminal grease before connecting together.
Please disconnect trailer end connector plug from your vehicle end connector plug carefully; Slowly - pull trailer plug end straight out from vehicle end plug and not at an angle. If not done with care - damage to the pole pin(s) on the trailer end plug can become unstable and require replacement. If done correctly plug ends should last a long time, but will over time and use require maintenance / repair-replacement.
Legal Disclaimer
Engineered for 12 Volt DC Powered Vehicles that are towing or hauling trailers or other vehicles/boats which require DOT Approved STT Tow Lights for Stop (brake), Turn (either left or right signal) and Tail lights (running lights) while driving on US highways, roads or public access ways. We use the STT wire standard configuration. STT Tow Lights are assembled by hand in the USA with most of the components made by USA companies. All Tow Lights are tested prior to packaging / shipment. We use either Curt, Hopkins, Reese or Pollak Plugs. All Quality plugs have been wired using the standard 4 way flat STT tow lights for trailer configuration. (The configuration of STT wire colors to light function is included w/ each order.) We will work with you as much as we can to configure the tow lights for your setup. NOTE: All Plugs are made outside the USA.