- Store
- >
- S.T.T. TOW LIGHTS
- >
- 4 Way Flat S.T.T. LED TOW LIGHTS, Spare Vehicle & Trailer End Plugs, 30Ft Cable from Plug End to Left Light + 7Ft cable between Led Tow Lights
4 Way Flat S.T.T. LED TOW LIGHTS, Spare Vehicle & Trailer End Plugs, 30Ft Cable from Plug End to Left Light + 7Ft cable between Led Tow Lights
SKU:
$145.00
145
145.5
$145.00 - $145.50
Unavailable
per item
​FREE USPS PRIORITY SHIPPING (3+ Day Service)
Product Description
Important Information:
Always keep both your vehicle end socket and your trailer end plug clean and free of dirt and debris. Use silicon, WD-40 or terminal grease before connecting together.
Please disconnect trailer end connector plug from your vehicle end connector plug carefully; Slowly - pull trailer plug end straight out from vehicle end plug and not at an angle. If not done with care - damage to the pole pin(s) on the trailer end plug can become unstable and require replacement. If done correctly plug ends should last a long time, but will over time and use require maintenance / repair-replacement.
Legal Disclaimer
Engineered for 12 Volt DC Powered Vehicles that are towing or hauling trailers or other vehicles/boats which require DOT Approved STT Tow Lights for Stop (brake), Turn (either left or right signal) and Tail lights (running lights) while driving on US highways, roads or public access ways.
All Tow Lights are tested prior to packaging / shipment.
We use either Curt, Hopkins, Reese or Pollak Plugs.
All Quality plugs have been wired using the standard 4 way flat STT tow lights for USA trailer configuration. (The configuration of STT wire colors to light function is included w/ each order.) We will try and help you as much as we can to assist with configuring the tow lights for your unique setup if changes need to be made.
NOTE: All Plugs are made outside the USA.
- Commercial Grade, Magnetic S.T.T. TOW LIGHTS, 37 Total Feet of 16/4 Cable, 4 WAY FLAT LED Circuit Tester Connector w/ dust cover, 1 Trailer End Plug SPARE & 1 Vehicle End Plug SPARE included to make EZ repairs on the road
- 3" Round ceramic magnet bases wrapped in 3M #33 or #88 Series Black Tape for vehicle metal surface protection
- Custom Made for the Professional Tow Industry, Recreational Luxury Mobile Home, RV, 5th Wheel or Cargo Trailer End-User
- 4 Way Flat LED Trailer Plug joined to 30' length cable run is 3M Tape Wrapped + Shrink Tubing, done w/pride in USA
- 37' Total Cable, 16 Gauge / 4 Conductor Wire, Black PVC Jacket (Made in USA)
- 30 Feet Cable run from trailer end plug to left LED light
- 7 Feet Cable length between Left & Right LED Lamps
- 4" Round LED's: MaXxima LED Lamps, S.T.T., 6 LEDs (diodes) per Lamp
- OPTION ONE: 4 Inch x 2 Inch Black Polymer Rectangle, 60 Pound Pull Strength Magnets (Assembled in-house, USA)
- OPTION TWO: 3 Inch Round, 60 Pound Pull Strength Ceramic & Chrome Magnets (Assembled in-house, USA)
- Heavy-Duty, Commercial Grade Truck-Lite Black Rubber Round Lamp Housings for Protecting LED's. Tow Lights have been rated for Endurance, Durability & Harsh Climate
- 1 Spare "Hopkins" 4 Way Flat Quick-Fix Vehicle end LED Plug included to complete the set should your vehicle connection require replacement (very easy to install / use)
- 1 Spare "Hopkins" 4 Way Flat Quick-Fix Trailer end LED Plug included should your vehicle connection require replacement (very easy to install / use) Also, this is the hardest working part repeatedly being pushed and pulled on and when maintenance is needed, you'll have a spare that can be changed out with a pliers and a screw driver.
- Terminal Grease Pack
- S.T.T. = Stop, Turn & Tail Lights, Left Turn Signal, Right Turn Signal, Brake Light Signaling, DOT Approved
- This product has many components that have been Designed, Manufactured and Assembled in the USA including testing of product prior to shipping of order.
Important Information:
Always keep both your vehicle end socket and your trailer end plug clean and free of dirt and debris. Use silicon, WD-40 or terminal grease before connecting together.
Please disconnect trailer end connector plug from your vehicle end connector plug carefully; Slowly - pull trailer plug end straight out from vehicle end plug and not at an angle. If not done with care - damage to the pole pin(s) on the trailer end plug can become unstable and require replacement. If done correctly plug ends should last a long time, but will over time and use require maintenance / repair-replacement.
Legal Disclaimer
Engineered for 12 Volt DC Powered Vehicles that are towing or hauling trailers or other vehicles/boats which require DOT Approved STT Tow Lights for Stop (brake), Turn (either left or right signal) and Tail lights (running lights) while driving on US highways, roads or public access ways.
All Tow Lights are tested prior to packaging / shipment.
We use either Curt, Hopkins, Reese or Pollak Plugs.
All Quality plugs have been wired using the standard 4 way flat STT tow lights for USA trailer configuration. (The configuration of STT wire colors to light function is included w/ each order.) We will try and help you as much as we can to assist with configuring the tow lights for your unique setup if changes need to be made.
NOTE: All Plugs are made outside the USA.